Цирконовый лист

Pure zirconium 702 sheet Zr702 plate 

Introduction to zirconium alloy:
The zirconium alloy is a solid solution of zirconium or other metals. Zirconium has a very low thermal neutron absorption cross section, high hardness, ductility and corrosion resistance. The main use of zirconium alloys is in the field of nuclear
technology, such as fuel rods in nuclear reactors. Typical compositions of nuclear grade zirconium alloys are more than 95% zirconium and less than 2% tin, antimony, iron, chromium, nickel and other metals added to improve mechanical properties and corrosion resistance. Zirconium alloy has good corrosion resistance, moderate mechanical properties and low atomic thermal neutron absorption cross section (Zirconium is 0.18 target) in high temperature and high pressure water and steam at 300-400 °C. It has good compatibility with nuclear fuel. It can be used as a core structural material for water-cooled nuclear reactors (fuel cladding, pressure pipes, supports and tunnel pipes), which is the main use of zirconium alloys. Zirconium has excellent corrosion resistance to various acids (such as hydrochloric acid, nitric acid, sulfuric acid, and acetic acid), alkalis, and salts, so zirconium alloys are also used to make corrosion resistant parts and pharmaceutical devices. Zirconium has a strong affinity with gases such as oxygen and nitrogen, so zirconium and zirconium alloys are also widely used as non-evaporable getters in the electric vacuum and bulb industries (see getter materials). Zirconium has excellent luminescent properties and is therefore a flash and pyrotechnic material.

Standard	ASTM B551
Grade	R60702, R60704, R60705
Thickness	0.5mm - 50 mm
Width	10mm - 2500mm
Technology	Hot-Rolled, Cold-Rolled, Hot forging , Machining
Condition	Annealed (M),Cold rolled(Y), Hot rolled(R) , Quenching(C)
Surface	Chemically cleaning or Machined to be bright. Dependent on different thickness.

Good rolling technology and annealing technology to supply the perfect Zirconium Plate (Zirconium Sheet).

ZHUO HANG XIN  supply zirconium plate and zirconium plate and are engineered to international standards and specifications, undergoing the highest level of quality control. Engineering standards defining the chemical composition, mechanical property and the tolerance of sheets are complemented with fully independent testing. We also have shearing capabilities to meet your specific project needs.

Chemical Composition

Grade	Element composition (%) <
	Zr+Hf	Hf	Fe+Cr	Sn	H	N	C	Nb	O
R60702	99.2	4.5	0.2	--	0.005	0.025	0.05	--	0.16
R60703	98	4.5	--	--	0.005	0.025	--	--	--
R60704	97.5	4.5	0.20~0.40	1.0~2.0	0.005	0.025	0.05	--	0.18
R60705	95.5	4.5	0.2	--	0.005	0.025	0.05	2.0~3.0	0.18
R60706	95.5	4.5	0.2	--	0.005	0.025	0.05	2.0~3.0	0.16

Surface roughness:

Cold rolled. bright: Ra ≤ 0.80 μm

Cold rolled. ground: Ra ≤ 1.20 μm

Cold rolled. pickled (dull): Ra ≤ 1.60 μm

Zirconium Sheets & Plates In Form:

Coils, Foils, Shim sheet, Perforated sheet, Strip, Flats, Blank (Circle), Ring (Flange), etc.

Quality Assurance:

According to globally recognized standards, such as ASTM

Chemical composition

Mechanical properties

ISO Quality Management System

Packing: Wooden case, plywood case, or according to clients’ demand.